- Toll Free: 1-800-863-2274Toll Free: 1-800-863-2274
- Local: 253-839-9636Local: 253-839-9636
- Fax: 253-839-2670
Need Help!! Call Now
1-800-863-2274
There are two standard cash drawer inserts for SAM4s cash registers The model 57 has been around for quite some time now and you will find a list of models below that only use the model 57. A few years ago SAM4s introduced a new insert called the model 60 insert. Here is the confusing part of this issue, some cash register models use one or the other depending on when the register was released. Below you will find a list of register models that might use the 57 or the 60.
I'm sure you would like to know which insert your register uses right? OK there are a couple easy tell tale signs of course. First is you have your existing insert measure it and compare to the measurements in the image above. The second method is to locate your drawer number on the front left of your cash drawer if it is still there. See the example directly below.
Here is the list of Samsung and SAM4s registers that only use the model 57 insert or till unless your register has an optional drawer installed, often called a deluxe drawer Please refer to the dimensions above.
Here is a list of models that could use either the nodel 56, 57 or 60 depending on when it was made. The model 60 drawer is no longer made. It was used in the early releases of the SPS-500 series machines. Very easy to distinguish because it featured a removeable coin section. Please see the image of the model 56 lower on this page. If your register has a model 56 you will need spacers to make the model 57 fit.
Here is an image of the model 56 insert which is no longer made. The 56 was used in the early release of the SPS-500 series registers (models 520f, 520F, 530F and the 530R). If your register was equipped with this insert and you need new a new insert you will require the spacers.
